TROUBLESHOOTING
26
Problem
Rechargeable battery needs recharging (continued)
Solution
Recharging Via the Single Charger
Remove the rechargeable battery wand
from the mount, or insert the single
charger cable without removing from
the shading.
■
Attach the plug adapter to the charger.
■
Attach the female end of the charging cable to the
charger, and the male end to the battery wand. If
additional length is required to reach the battery,
attach additional charging cables as needed.
■
Insert and twist cables together to ensure they do not accidentally become
unplugged during charging.
■
Plug the charger into a standard AC outlet.
■
Plug the charging cable into the charging outlet on the rechargeable
battery wand. The charging outlet is near the nose of the wand.
■
A red light indicator confirms the battery wand
is properly inserted and is charging.
CAUTION:
Do not attempt to plug the charging
cable into the battery mount’s power socket.
Doing so will not only fail to charge the battery
wand but could possibly cause damage to both
the single charger and the battery mount.
■
Once the battery has been fully recharged, the red light indicator will turn
green. Charging may take up to two hours, depending on your battery level.
■
Remove the charging cable from the battery wand.
(Continued on next page.)
Rechargeable
Battery Wand
Single
Charger
3 ft
charging
cable
12 ft
charging
cable
15 ft
charging
cable
Single
Charger
3 ft
charging
cable
Rechargeable
Battery Wand
Not this
socket
