HunterDouglas Applause Скачать руководство пользователя страница 31

Страница: 31 / 35

CARE

Removing the Shade (If Necessary)

Inside Mount

■

Raise the shade to the top.

■

Unplug the power supply cable.

■

If there are screws attaching the
side rails to the window frame,
unscrew them.

■

Insert a screwdriver at the lower
corners of the shade.

■

Push back the brackets to release
the lower end of the shade.

■

Pull and slide the shade out of the
upper brackets.

Outside Mount

■

Unscrew the installation screws from the mounting surface.

Cleaning Procedures

Hunter Douglas Duette

and Applause

Honeycomb Shades are made of anti-static, dust-

resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following cleaning
options are available.

Dusting

■

Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.

Vacuuming

CAUTION:

Do not vacuum Elan

fabrics.

■

For deeper cleaning, vacuum gently with a brush attachment.

Compressed Air/Hair Dryer (Cool Setting)

■

Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.

Spot-Cleaning

CAUTION:

Do not spot-clean Alexa, Alexa Metallic

™

, Apollo

™

, Calypso

™

, Commercial, Elan

Applause Esprit

™

, India Silk

™

, Jardin

, Leela

™

, Macon

™

, and all Batiste fabrics.

■

Prepare a solution of warm water and a mild detergent.

■

Dampen a clean cloth in the solution and wring it out.

■

Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.

■

Allow the shade to dry in the completely lowered position.

Содержание Applause




































Результаты поиска

Содержание Applause

Отзывы:

Похожие инструкции для Applause

Бренды по названию

Популярные бренды

HunterDouglas Applause, Руководство по установке

Результаты поиска

Содержание Applause

Отзывы:

Похожие инструкции для Applause

Бренды по названию

Популярные бренды