Hunter X-CORE XC-2, Быстрый старт, Страница: 6 / 8

6 https://hunter.help/ XCore
Troubleshooting
Display Possible Cause Solutions
DISPLAY SHOWS “ERR”
WITH NUMBER Short in field wiring or bad solenoid. Check field wiring and valve solenoid. Press any button to clear
ERR message.
DISPLAY SHOWS P “ERR” Short in P/MV wiring or solenoid. Check wiring and solenoid at P/MV . Check specifications for Pump
Start Relay.
DISPLAY SHOWS SP
“ERR” SmartPort
®
error. Electrical noise is
present near connection to remote
or other SmartPort device.
Move connections away from sources of electrical noise. Verify that
controller has been wired correctly.
Wire from SmartPort Attach wire to:
Red 24 VAC (AC terminal 1)
White 24 VAC (AC terminal 2)
Blue Remote terminal (REM)
DISPLAY SHOWS
WATERING BUT
NO WATERING IS
OCCURRING
Problem in field wiring. Problem
with solenoids. No water pressure
to system. Check field wiring (voltmeter). Check valve solenoid(s). Verify water
source to open.
FROZEN OR GARBLED
DISPLAY Power surge occurred. Reset controller.
RAIN SENSOR DOES NOT
STOP IRRIGATION Jumper wire is not removed. Sensor
switch in
BYPASS position.
Remove jumper wire on SEN terminals. Set sensor switch to
Active position.
CONTROLLER SEEMS TO
WATER CONTINUOUSLY Too many START TIMES . One Start Time operates all stations in a program. Remove
unnecessary Start Times.