4
https://hunter.help/
XCore
Setup
SETTING WATER DAYS
1.
Turn the dial to the
WATER DAYS
position.
2.
The display will show the last program selected (
A
,
B
, or
C
).
Switch to another program by pressing the
PRG
button.
3.
The pointer at the bottom of the screen shows the currently
selected day of the week. Press
+
or
–
to select days for
watering or no water .
SELECTING ODD OR EVEN DAYS TO WATER
1.
Press ► past all days of week to
ODD
or
EVEN
.
2.
Press
+
to select or
–
to cancel
ODD
or
EVEN
.
SELECTING INTERVAL WATERING
1.
Press ► past
ODD
and
EVEN
to
INT
.
2.
Press
+
or
–
to set interval days.
3.
Press
+
or
–
to set number of days to next watering.
NOTE:
To exit interval mode, press the ► or ◄ repeatedly until
specific days of the week appear.
SEASONAL ADJUST
•
Changes all run times by a percentage for local conditions.
•
Press
+
or
–
to change from 10% to 150% of original run times.
MANUAL SINGLE STATION
1.
Turn dial to Manual Single Station position.
2.
Press ► to select station. Use
+
or
–
to set manual run time.
3.
Turn dial to
RUN
position to begin immediately.
MANUAL PROGRAM
1.
Turn dial to
RUN
position.
2.
Press and hold ► button for three seconds.
3.
Press
PRG
to select program.
4.
Release button for two seconds. Program will begin.
5.
Press ► to advance to another station within the Program.
ONE-TOUCH MANUAL START AND ADVANCE
1.
Hold down the right button for two seconds.
2.
Press the
PRG
button to select program.
3.
Press the left or right button to select a station.
4.
Press the
+
or
–
button to change the run time.
5.
After a two-second pause, the program will begin. At any time
during manual cycle, use the left or right buttons to navigate
from station to station manually.