Built on Innovation
®
3
Setup
SETTING THE CURRENT DATE AND TIME
1.
Turn the dial to the
DATE/TIME
position.
2.
The current year will be flashing. Use the
+
and
–
buttons to
change the year. Push the ► button to proceed to setting
the month.
3.
The month will be flashing. Use the
+
and
–
buttons to change
the month. Press the ► button to proceed to the day setting.
4.
The day will be flashing. Use the
+
and
–
buttons to change
the day of the month. Press the ► button to proceed to the
time setting.
5.
The time will be displayed. Use the
+
and
–
buttons to select AM,
PM, or 24 HR to display all times in 24–hour mode.
6.
Press the ► button to move to hours. Use the
+
and
–
buttons to
change the hour shown on the display.
7.
Press the ► button to move on to minutes. Use the
+
and
–
buttons to change the minutes shown in the display.
8.
Turn the dial to the
RUN
position. Date and time are now set.
IMPORTANT:
The controller dial must be in
RUN
position to enable
automatic irrigation.
SETTING A PROGRAM START TIME
1.
Turn the dial to the
START TIMES
position.
2.
Use the
PRG
button to select program (
A
,
B
, or
C
).
3.
Use the
+
and
–
buttons to change the Start Time. The Start
Time advances in 15-minute increments.
4.
Press the ► button to add another Start Time, or
PRG
button
to set a Start Time for the next program.
5.
Turn the dial to the
RUN
position.
ELIMINATING A PROGRAM START TIME
1.
Turn the dial to the
START TIMES
position.
2.
Press the right arrow to locate the desired
START TIME
.
3.
Press the
+
or
–
buttons to reach
OFF
located between 11:45 PM
and 12:00 AM.
4.
Press the
PRG
button to view/edit additional programs.
Repeat steps 1–3 if necessary.
SETTING A STATION RUN TIME
1.
Turn the dial to the
RUN TIMES
position.
2.
Use the
PRG
button to select program (
A
,
B
, or
C
).
3.
Use the
+
and
–
buttons to change the station run time on the
display. You can set station run times from 1 minute to 4 hours.
4.
Press the ► button to advance to the next station.
5.
Repeat for each station.