Hunter Genesis Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 43

Hunter Genesis Скачать руководство пользователя страница 18

GENESIS OPERATIONS MANUAL

16

4. USE THE RAIN SHUTDOWN FEATURE

When you press OFF without selecting a Program, all irrigation is stopped and the display shows:

Rain Shutdown?

Press ENTER to engage the Rain Shutdown feature. The display alternates between the time and this
message:

RAIN SHUTDOWN!

All current irrigation is stopped as well as any programmed starts until you return the controller to Auto Operation.

To restart normal operation after a rain shutdown:

The display shows:

Auto Operation?

Press ENTER to restore the system to normal, programmed operation. The time display returns.

Note: To shut down all irrigation for a specified number of days and automatically resume, use Option #6 - Skip
Days.

5. OPERATE STATION(S) MANUALLY

The Manual key allows you to operate from 1 to 6 stations manually, either simultaneously or in sequence, for a
Run Time of your choosing. If you choose to operate multiple stations manually, Genesis will temporarily assign
the manual stations a letter (A through F) for your reference while in the manual displays.

Note: In the Manual function, you can exit by pressing TIME.

To turn on a station in Manual:

Puts the controller in the proper mode for operating a manual sequence. The display shows:

M/P A Sta - -

Press the number key for the first station you want to operate, then press ENTER. The display for
this example (station #1) shows:

M/P A Sta01 0:00

Press the number key(s) for the length of Run Time you want at this station. The display for this
example shows five:

M/P A Sta01 0:05

«
...
16
17
18
19
20
...
»

Содержание Genesis












































Отзывы:

Нет отзывов