Hunter G835, Руководство пользователя

Страница: 32 / 58

Important – take note of how the g800 Valve tool nests with the attached inlet valve. this will help later when
attaching the inlet valve to the tool prior to inlet valve installation.
to disengage the inlet valve from the g800 Valve tool, hold the inlet valve with one hand and the tool with the other
hand. next, push the tool’s handle toward the inlet valve to compress the tool’s spring (fig 85). With the spring held
compressed, rotate the tool’s handle counter-clockwise to release the tool’s hooks from the inlet valve.
Inlet valve removal option 2 – once the white lower snap-ring has been removed, the inlet valve is released and is
ready for removal. First notice the raised wall or rib that protrudes upward from the center of the inlet valve (fig 86).
use the 16” needle-nose pliers tool to grab this protruding rib firmly. While holding the protruding rib firmly with the
16” needle-nose pliers tool, pull upward to disengage and remove the inlet valve from the rotor’s body (fig 87).
FIg 80
FIg 83
FIg 86 FIg 87
FIg 81
FIg 84
FIg 82
FIg 85
Fig 80
Fig 81 Fig 82
Fig 83 Fig 84
Fig 85
Fig 86
Fig 87
Fig 86
Fig 87
Fig 83 Fig 84
Fig 85
Fig 83 Fig 84
Fig 85
Fig 80
Fig 81 Fig 82
Fig 80
Fig 81 Fig 82
29