Hunter DDI, Руководство по установке

Страница: 20 / 26

20
STEP 3
STEP 1
INSTALLATION
STEP 7: HMI CONTROLLER MOUNTING
DDI 3 SPEED ANALOG CONTROLLER MOUNTING
1. Using a phillips head screwdriver remove the 2 screws on the controller faceplate.
2. Feed one end of the CAT5e cable through the desired junction box opening and insert it into the connector jack on the inside of
the controller. Then replace the faceplate and re-install the 2 screws.
3. Using the mounting bracket as a guide mark the 4 locations the mounting hardware will anchor to the wall or surface.
4. Using appropriate anchoring hardware for the surface type, anchor the the mounting bracket and controller to the surface in
the 4 locations.
5. The other end of the CAT5e cable will be ran to the VFD into the Comm 1 port.