Hunter Douglas Silhouette, Установка Эксплуатация Уход

Страница: 7 / 20

INSTALLATION
5
■
Attach the installation brackets using the screws provided.
IMPORTANT:
Do not overtighten the screws. Check to ensure the
lever can be moved easily side to side. If not, loosen the screws in
one-eighth turn increments until the lever can be moved easily.
■
If using the optional back cover: Install the cover into
the back cover brackets. If necessary, trim the back
cover to the desired width.
Proceed to “Install the Shading” on page 7.
Mount the Installation Brackets — Outside Mount
Mount the Installation Brackets
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail on the mounting surface.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark 2" to 3" from each end of the headrail for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
Back
Cover
Window Opening
Space Evenly Space Evenly 2" to 3" 2" to 3"
Headrail End Mark Headrail End Mark