background image

CARE

15

Spot-Cleaning

 

Do not spot-clean anything other than the Palette

®

 Fabric-Covered Headrail on Silhouette

®

 

Window Shadings.

Ultrasonic Cleaning

Silhouette Window Shadings can be ultrasonically cleaned by a professional, 

with the 

exception of all Bon Soir

 fabrics, Brio

, ClearView

 Originale

, ClearView Tapestry

India Silk, The Matisse Collection

®

, and Mystere.

 

Specify that a mild detergent solution be used. 

 

Never immerse the headrail in the solution.

 

Dry the shading completely in the lowered position.

Injection/Extraction

Silhouette Window Shadings can be professionally cleaned using the injection/extraction method.

 

Use only the dry method of injection/extraction for Bon Soir fabrics.   

 

Never immerse the headrail in the solution.

Electrostatic Cleaning

Do not use electrostatic cleaning wipes on any Silhouette window shadings.

A Note About Hardware for The Alustra

®

 Collection

Gold Radiance

,

 

Silver Reflection

, Bronze Shimmer

, and Champagne Shine

 hardware 

finishes can be spot-cleaned with luke warm water and a mild soap. Do not use alcohol, baby 
wipes or alkaline cleansers. These may stain or destroy the finish.

A Note About Silhouette Fabrics

As with all textiles, Silhouette fabrics are subject to some variations. Slight wrinkling, puckering, 
or bowing is inherent to this textile product and should be considered normal, acceptable quality. 
These characteristics are not usually visible from the front or rear but may be visible from a 
side angle.

Precautions should be taken to reduce exposure to harsh environmental elements, such as 
salt air. Continuous exposure through open windows and doors will accelerate the fabric 
deterioration.

Содержание Silhouette





















Отзывы: