Hunter Douglas Silhouette, Установка Эксплуатация Уход

Страница: 13 / 20

OPERATION
11
Problem
The shading does not raise or lower completely.
Solution
Check that the shading fabric is not catching on any brackets or window
components.
Adjust the upper and/or lower bottom rail travel limits (see below).
Problem
The bottom rail stops before reaching the desired bottom or upper position,
or the bottom rail keeps moving after reaching the desired bottom or upper
position.
Solution Adjust Travel Limits
Two buttons — one yellow and one
black — are located on the underside
of the motor, next to the right end cap.
These buttons are used to adjust the
shading’s travel limits.
Adjust Bottom Travel Limit
■
Push the yellow button in until it clicks into a
recessed position.
■
If the bottom rail stops before the desired
bottom position:
Lower the bottom rail to the
desired bottom position.
➤
Release the yellow button by pushing on it.
■
If the bottom rail lowers farther than the desired bottom position or
raises after reaching the desired bottom position:
Operate the shading
until the bottom rail reaches the desired bottom position.
➤
Release the yellow button by pushing on it.
■
Raise the shading 12" up from the bottom, and lower it again to check your
adjustment. Repeat the sequence if necessary.
Depress
Yellow Button
Depress
Black Button
Yellow
Black