Hunter Douglas Silhouette, Установка Эксплуатация Уход

Страница: 10 / 20

INSTALLATION
8
■
Firmly push the headrail into each bracket until it clicks and the lever snaps to the right side
of the bracket.
CAUTION:
Failure to snap the headrail securely into the installation brackets may cause
the shading to release unexpectedly.
IMPORTANT:
Carefully pull on the headrail at each bracket to ensure it is
installed securely.
■
Completely remove the protective covering from the fabric-covered headrail.
Attach the Dust Cover (Optional for Outside Mounts)
The dust cover is used to protect the top of the headrail from exposure on outside mounted
shadings.
■
Cut the dust cover to desired width.
■
Remove the paper backing on one side of the hook and loop
fastener dots.
■
Apply the dots to the installation brackets on each end of the shading.
■
Remove the remaining paper backing from the dots.
■
Center the dust cover over the top of the shading, above the dots.
■
Press the dust cover down onto the dots.
Remove
Paper
Backing
Overhead View
No Dust Cover
Dots
Dust Cover Installed