Hunt Graphics IMAGE 410, Руководство пользователя

Страница: 9 / 29

- 9 -
3
H
n
Bottom Heater Indicator Light is lit when bottom
heater is on.
10. Bottom Heater Temperature Adjust Button.
n
Push either arrow (up or down) once to see top
temperature set point. Push and hold either arrow to
raise or lower temperature.
11. Nip Indicator Lights indicate which nip setting the
rolls are currently set at.
12. Nip Adjustment Button.
n
Up Arrow push once to raise one setting. Push and
hold to raise multiple settings.
n
Nip Adjustment Button down Arrow push once to
lower one setting. Push and hold to lower multiple
settings.
13. Program Readout indicates which program is
currently available.
14. Program Select Button. (Choose a preset program)
n
Push up or down arrow once to see current program
settings. (Speed and Temperature Readouts). Push
and hold up or down arrow to raise or lower
numbered program.
15. Program Enter Button (This button has two
functions.)
Function A
n
Push and release to load shown program (See item
#13).
Function B
n
To program a new preset, First choose the program #
you want to set (1-9).
Set the heat and motor speeds to how you want the
program to recall them. Push and hold button 15.
The screen will go blank (approximately three
seconds), and then the program will appear on the
display. Release the button.
Note: After a program has been loaded, the operator
can still change heat and speed settings with their
respective up and down arrows.
16. Reverse Mode Button reverses the direction of the
rollers.
n
The Reverse Mode Button may be utilized only when
the motor is off.
n
Push the Reverse Mode Button.
n
Reverse Mode Indicator light is on.
n
Depress the footswitch to activate the reverse roller
movement.
n
Motor Indicator light is lit while depressing the
footswitch.
n
The rollers will reverse at 1 ft./min. (.3M). The speed
cannot be adjusted.
To return to forward roller movement:
n
With the footswitch inactive, push the Reverse Mode
Button (Reverse Mode Indicator light will be off).
n
Push the Motor Button (#2).
n
Motor Indicator light is on.