Hunt Graphics IMAGE 410, Руководство пользователя

Страница: 4 / 29

- 4 -
3
H
SAFETY FEATURES AND BENEFITS
The Image
®
410 is one of the safest laminators on the
market.
n
The side plate covers can be opened only with an
Allen wrench, this should be done by an authorized
Service Technician.
n
Photoelectric Safety Eyes prevent foreign objects
from passing between the main rollers. When a
photoelectric eye is blocked, the laminator rollers
stop.
n
Emergency Stop Buttons are located on both sides of
the machine. The emergency stop buttons shut down
all power to the machine and raise the rollers. They
should only be used in case of an emergency. Once
pressed, the buttons lock and need to be turned
clockwise to reset. Thereafter, the power button must
also be turned on. If the emergency stop is
depressed, the machine will default to program 1
upon restart.
n
Covered footswitch prevents accidental activation of
roller movement. It can be used to give the operator
control when feeding an image through the machine.
n
Buzzer and Flashing Light warns the operator if
fingers are getting too close to the nip while using the
footswitch.
n
Infeed Table has a channel to allow for easy media
feeding while keeping fingers a safe distance from the
main rolls.
n
Enclosed pull system prevents foreign objects from
passing between the rollers.
n
Power Disconnect Switch is located on the left side
leg. When turned to the off position, will shut off the
laminator.
SAFETY AND WARRANTY INSTRUCTIONS
n
Read all safety and operating instructions before
operating the machine.
n
Adhere to all warnings on the machine and in the
manual.
n
Follow all operating and user instructions.
n
Operate the machine with the type of power sources
indicated in this manual.
n
Refer all servicing to an authorized service
representative. Servicing by any unauthorized
technician voids the warranty.
n
Hunt Graphics must specify replacement parts.
n
Service Technicians must perform safety checks after
completing any service or repair.
n
Use only enclosed knife cutters around the machine.
n
Never cut or slice directly on the rollers.
n
Keep all objects such as tools, pens, etc. away from
the roller opening.
n
Do not wear loose garments or loose jewelry while
operating the laminator.
*
Warning! When the laminator is not in use, adjust
the nip gap to at least 3/16” (setting 5). This will prevent
flat spots from developing on the main rolls. Flat spots
will effect the quality of the output and void warranty.
*
Warning! When the laminator is not in use, or while
rollers are heating up, pivot the front table away from the
rollers. This will prevent the front table from possible
distortion. Warranty will not cover distorted tables.