Humminbird CHIRP Скачать руководство пользователя | Manualshive

Страница: 9 / 40

background image

1

Overview

Introduction

The Humminbird Radar scanner is a compact, solid-state radar that utilizes CHIRP pulse compression for
improved range resolution. Connect the Radar scanner to your Humminbird control head to view a map-like
representation of the area surrounding your vessel, enabling you to identify other vessels, buoys, and land
features such as coastlines and hills.

The Humminbird Radar scanner includes the following features:

• Solid-state technology (no magnetron) for improved efficiency and quick start-up.

• Range performance up to 24 nm (dependent on installation location).

• CHIRP pulse compression for improved target range resolution and reduced background noise.

• Radar image display and control via compatible Humminbird control head.

• 24 RPM scanner rotation.

• Low power consumption.

Installation Overview

This manual will guide you through the following installation requirements for the Humminbird Radar
scanner:

• Preparing for Installation

• Selecting the Mounting Location

• Installing the Radar Scanner

• Connecting to Power and Ethernet

Multiple Radar Installation:

Only one radar scanner can be used at any one time, per networked system.

If you have more than one radar scanner installed on your boat and want to use them at the same time, the
control heads to which the scanners are connected must NOT be networked together.

CAUTION!

Installation and radar tuning should only be performed by a qualified radar service technician.

CHIRP_Radar_Install_Manual_532523-1EN_A.qxp_Layout 1 8/11/16 10:48 AM Page 1

«
...
7
8
9
10
11
...
»

Содержание CHIRP









































Отзывы:

Нет отзывов

Похожие инструкции для CHIRP

Бренд: Telestar Страницы: 406

Бренд: Memorex Страницы: 48

A1101R09 Series

Бренд: Anaren Страницы: 26

Бренд: Navico Страницы: 22

Бренд: Vertex Standard Страницы: 20

Бренд: Philips Страницы: 1

Бренд: Philips Страницы: 12

Бренд: Philips Страницы: 13

Бренд: Philips Страницы: 14

Бренд: Philips Страницы: 27

Бренд: Philips Страницы: 37

Бренд: Ericsson Страницы: 16

Бренд: Timex Страницы: 19

Бренд: Roberts Страницы: 44

Бренд: Prunus Страницы: 2

Бренд: Gogen Страницы: 36

Бренд: Entel Страницы: 24

Бренд: Xact Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды