3
Installation Preparation
rage
y.
ower
ious
the
ratic
nside
s
bolts
2. Determine the Cable Requirements
Depending on your Humminbird model and network configuration, you may need to purchase additional
accessories to connect your Radar scanner to your control head or Ethernet network. Before starting the
installation, determine whether you will need to purchase Ethernet Adapter Cables or extension cables.
Also, see
Connect to Power and Ethernet
for more information.
3. Create a Schematic Diagram
A schematic diagram is an essential part of planning any installation. It is also useful for any future additions
or maintenance of the system. The diagram should include the following:
• Location of all components
• Cable types, routes, and lengths.
NOTE:
Confirm that you have read and understood the warnings and cautions provided in the
Important
Information
section before proceeding with the installation.
Hardware
Cable Requirement to Connect to Radar Scanner
Voltage Requirements
ONIX/SOLIX
No additional cables required.
12 VDC
HELIX
Separate purchase AS EC QDE Ethernet Adapter
Cable is required.
12 VDC
Ethernet Switch
No additional cables required.
12 or 24 VDC
Example of a Schematic Diagram with a Direct Connection to the Control Head
Radar scanner
control head power cable
(6 ft [2 m])
Radar scanner
power cable
(32.8 ft [10 m])
control head
power supply
AS EC M12 to RM data cable (included)
(32.8 ft [10 m])
ONIX control head
separate 12/24 V
power supply
CHIRP_Radar_Install_Manual_532523-1EN_B.qxp_Layout 1 7/17/17 10:20 AM Page 3
Содержание CHIRP
Страница 1: ...Humminbird CHIRP Radar Installation Manual Humminbird CHIRP Radar Installation Manual ...
Страница 8: ......
