Humminbird CHIRP, Руководство по установке

Страница: 34 / 40

Tro
Befo
revie
ther
No
•
•
•
•
•
•
Dis
Refe
Noi
If yo
Maintenance
Use the following procedures to ensure your Humminbird product continues to deliver top performance.
HIGH VOLTAGES WARNING! This product may contain high voltages. Do NOT remove any covers
or otherwise attempt to access internal components.
Recommended Yearly Maintenance Tasks
Clean the Hardware
1. Power off the Radar scanner.
2. Remove one of the bolts and associated washers.
3. Clean the bolt and washers.
4. Replace the bolt and washers.
5. Repeat steps 2 through 4 for all bolts.
6. Tighten all antenna-securing bolts to a torque of 11 ft·lbf (15 Nm).
Check the Cable Connections
1. Power off the Radar scanner.
2. Check that all connected cables are in good condition and securely attached.
3. Examine all cables for signs of chafing, cuts or other damage.
Check the Radar Scanner
1. Power off the Radar scanner.
2. Ensure the Radar scanner is firmly attached to the mounting surface.
Cleaning the Radar Scanner
The Radar scanner does not require regular cleaning. However, if you find it necessary to clean the unit,
please follow the steps below:
1. Power off the Radar scanner.
2. Wipe the unit clean with a damp cloth.
3. If necessary, use a mild detergent solution to remove grease marks.
Storage Requirements
Store upright, making sure you do not block the vents on the underside of the Radar scanner.
26
Maintenance
CHIRP_Radar_Install_Manual_532523-1EN_A.qxp_Layout 1 8/11/16 10:48 AM Page 26