Humminbird ] 981 Скачать руководство пользователя

Страница: 76 / 95

LAT/LON GRID

Lat/Lon Grid

allows you to display or hide a

grid showing latitude and longitude lines.

To change the Lat/Lon Grid setting:

1. Highlight Lat/Lon Grid on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid

setting. (Hidden, Visible, Default = Hidden)

SPOT SOUNDINGS

Spot Soundings

allows you to display or

hide spot soundings, which are depth measurements shown on the chart.

NOTE:

Spot Soundings are only available with optional-purchase MMC/SD cards.

To change the Spot Soundings setting:

1. Highlight Spot Soundings on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings

setting. (Hidden, Visible, Default = Hidden)

SHADED DEPTH

Shaded Depth

allows you to change the

depth used for shading on the chart views.

To change the Shaded Depth setting:

1. Highlight Shaded Depth on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Shaded Depth

setting. (Off, 1 to 60 Feet or 1 to 20 Meters

[International Units Only]

, Default =

15 ft, 5 m)

SET SIMULATION POSITION

(Advanced)

Set Simulation Position

allows you to set the position of the boat used in the Simulator.

To set the Simulation Position:

1. Activate the cursor and move it to the coordinates from where you want

simulation to start.

NOTE

: The cursor must be active in order for this procedure to work.

2. Make sure you are in Advanced User Mode, then highlight Set Simulation

Position on the Navigation main menu.

3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position

setting. A confirmation dialog box will appear to allow you to change your
mind, or to confirm your choice. If the cursor was not active before you began
this procedure, you will see an error message. Exit the menu, set the cursor, then
try again.

98x_Manual_531376-1_A.qxd 2/23/2005 11:41 AM Page 76

Содержание ] 981
































































































Результаты поиска

Содержание ] 981

Отзывы:

Похожие инструкции для ] 981

Бренды по названию

Популярные бренды

Humminbird ] 981, Руководство по установке и эксплуатации

Результаты поиска

Содержание ] 981

Отзывы:

Похожие инструкции для ] 981

Бренды по названию

Популярные бренды