Humminbird 1157c Combo CHO страница 132 Скачать руководство пользователя

Страница: 132 / 200

The Waypoint Submenu contains the following menu choices:

Edit

allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used

to represent the waypoint in the Chart and Combo Views.

Delete

allows you to delete a waypoint from the list of saved waypoints.

Target

allows you to apply a target to a waypoint selected from the list of waypoints.

Grid

allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

Cursor to Waypoint

(Chart or Combo view only)

Cursor to Waypoint

allows you to quickly move the cursor to any saved waypoint, so that you can locate

it or edit it.

NOTE:

This X-Press™ menu item appears only if you have saved waypoints.

To move cursor to a saved waypoint:

1. Highlight Cursor to Waypoint on the Navigation X-Press™ menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.

3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to move the

cursor to, then use the RIGHT 4-WAY Cursor Control key to select the destination waypoint.

Save Current Track

allows you to save the current track being

displayed. After the current track is saved, a new current track is started.

To Save Current Track:

1. Highlight Save Current Track on the Navigation X-Press™ Menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3. The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once

more. To cancel saving the current track, press the LEFT Cursor key.

122

Содержание 1157c Combo CHO









































































































































































































Результаты поиска

Содержание 1157c Combo CHO

Отзывы:

Похожие инструкции для 1157c Combo CHO

Бренды по названию

Популярные бренды

Humminbird 1157c Combo CHO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 1157c Combo CHO

Отзывы:

Похожие инструкции для 1157c Combo CHO

Бренды по названию

Популярные бренды