ElectroVap RTH
Changing Unit Configuration
Menu
Software Assistant
(continued)
CHANGING THE MAXIMUM STEAM OUTPUT:
Scroll menu to get this message, press the key and the value will flash.
Using the and keys, adjust the maximum output from 100% to 50%.
Once the desired value is reached, press the key to confirm.
The display will show :
STEAM CAPACITY
LIMIT :
.…%.
RECORDED
PARAMETER.
Example
FREQ: 1 DRAIN EVERY
4 CYCLES
STOP RTH WHEN
MAINTENANCE YES / NO
IDENTIFICATION
………...
TRANSMISSION SPEED :
9600 B/S
Determines the draining frequency of
the short duration drains.
Select shut down or continue to
operate when the maintenance
message is shown.
To assign an identification number to
this unit when there are a number of
humidifiers.
DRAINING AFTER A STOP
OF : ….. H
NO
YES
23
