ElectroVap RTH
RTH Startup
Software assistant
STARTUP
1
After completion of the installation inspection,
turn on the water supply to the unit
2
Switch on the main power supply.
3
The power lamp should be illuminated.
4
Switch the power supply I/O switch on I. The
display will default to show the rate of steam
produced.
Display operation :
1
Pressing the SELECT button repeatedly
will rotate between the three main menus.
2
Enter the desired menu by pressing the up
or down button.
The unit provides three menus :
HUMIDIFIER CONFIGURATION
This menu provides information only on the setup
of the humidifier. No parameters can be changed
from within this menu.
HUMIDIFIER STATUS
This menu provides information on the operating
status of the humidifier. No parameters can be
changed from within this menu.
CHANGING UNIT CONFIGURATION
This menu allows adjustments to the setup or
operating parameters of the unit. Access to the
changing humidifier configuration menu is
protected by an access code to guard against
unauthorized access. See Configuring the unit .
18
