Humbaur 1374.610 Скачать руководство пользователя

Страница: 6 / 56

6/56

V 2019/01

Original Operating Instruction Manual

1 Safety and warning instructions

1.1 Signal words

In this manual, you are informed about the different degrees
of risk as follows:

Possible risk with high level of risk

Not preventing this risk would result in fatal or serious injuries.

Possible risk with medium level of risk

Not preventing this risk could result in fatal or serious injuries.

Possible risk with low level of risk

Not preventing this risk could result in slight or minor injuries.

Possible risk of material damage

Not preventing this risk could result in material damage.

1.2 Text signs

►

(Arrow) Request for action

•

(Bullet point) List

1. (Number) List of components

DANGER

WARNING

CAUTION

NOTICE

1.3 Warning signs / pictograms

1.3.1 Danger signs:

Warning about danger points!

Be careful - people could be injured!

Risk of crushing!

For limbs such as: Hands / fingers / feet.

Crushing / impact risk!

For body / body parts.

Risk of falling!

People may fall and injure themselves.

Risk of slipping!

On smooth / wet / slippery surfaces.

Risk of tripping!

Obstacles on moving surfaces / in the working area.

1.3.2 Prohibitory signs:

Access prohibited for unauthorised persons!

Spraying with water prohibited (high-pressure cleaner)!

Standing on surface / area prohibited!

Climbing up prohibited!

1.3.3 Mandatory signs:

Important information - take note!

Note and observe to ensure safe use.

Read operating instruction manual beforehand!

Wear sturdy footwear!

Wear protective gloves!

Disconnect from the mains power!

Carry out work in 2-man operation!

1.3.4 Other important pictograms:

Dispose of old tyres correctly!

Do not dispose of tyres in the environment!

Problem waste!

Do not dispose of waste in the environment / with the
domestic waste!

Banksman / second person required!

Risk of polluting the environment!

Содержание 1374.610

























































Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды

Humbaur 1374.610, Руководство по эксплуатации

Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды