Humbaur 1374.610 Скачать руководство пользователя

Страница: 14 / 56

14/56

V 2019/01

Original Operating Instruction Manual

6.2 Hand brake with push button

Hand brake with push button (parking position)

1.  Release button
2.  Hand brake lever, engaged / top
3.  Gas strut, extended
4.  Brake linkage, applied

Functional explanation

•

Hand brakes with a push button do not need to be pushed

beyond a ratchet point.

•

The hand brake is released using a push button.

On a hand brake with toothed segments, the hand brake
lever needs to be applied to the last tooth and needs to
be released to the first tooth.

H - 007

Engaging the hand brake

1.  Hand brake lever
2.  Brake, applied
3.  Jockey wheel (in parking position)
4.  Gas strut

►

Wind down the jockey wheel (3) until it reaches the floor.

►

Pull the hand brake lever (1) as far up as possible so that

the brake (2) is fully applied.

►

Push the trailer back slightly.

The gas strut (4) fully applies the hand brake.

H - 008

Releasing hand brake

1.  Release button
2.  Hand brake lever
3.  Gearing / Locking system

►

Pull the hand brake lever (2) slightly upwards while at the

same time pressing the release button (1).

►

Guide the hand brake lever all the way down towards the

coupling.

The gearing is released by the locking mechanism (3).

The hand brake lever rests on the overrun device.

Hand brake released (driving position)

H - 009

H - 010

Содержание 1374.610

























































Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды

Humbaur 1374.610, Руководство по эксплуатации

Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды