Humbaur 1374.610 Скачать руководство пользователя

Страница: 28 / 56

28/56

V 2019/01

Original Operating Instruction Manual

8.1 Drop sides

Functional explanation

•

Drop sides form a box shape that enables the load to be

secured with a positive fit.

•

The front wall and side drop sides are permanently

installed.

•

The tailgate can be folded down and removed.

WARNING

Unsecured latches / tailgate!

The tailgate may fold down when driving. Goods may be lost - risk

of accident!

►

Check that all latches are closed before driving off.

Driving with the tailgate side folded down!

Rear lighting is covered - risk of accident!

►

Remove the rear tailgate when driving with goods

projecting to the rear.

CAUTION

Using the latches and operating the tailgate!

Hands could be crushed when opening / closing the
tailgate and latches.

►

Use

►

Carefully fold down the tailgate.

►

Do not hold the tailgate you intend to latch directly in the

area where the stanchions or latches are.

►

Close the latches with the flat of your hand.

Removing the tailgate / side wall extensions!

Removed tailgate / side wall extensions may become
an obstacle - tripping hazard!

►

Do not place the removed tailgate / side wall extensions

directly in the area required for loading / unloading.

►

Secure the removed components to prevent them from

falling over.

H - 51

Tailgate / drop sides closed

1.  Tailgate, folding
2.  Side wall hinge
3.  Stanchion
4.  Latch (locked)
5.  Side wall extension (300 mm)

H - 52

Drop side latch (locked)

1.  Hook plate
2.  Bracket
3.  Securing device
4.  Handle

Unlocking the latch

H - 53

Unlocking the latch

►

Engage the latch (3).

►

Pull the handle out (4).

►

Release the bracket (2) from the hook plate (1).

Locking the latch

H - 54

Closing the latch

►

Place the bracket over the hook plate.

H - 55

Locking the latch

►

Push the handle closed with the flat of your hand.

The lock latches into place.

The drop side latch is locked.

Содержание 1374.610

























































Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды

Humbaur 1374.610, Руководство по эксплуатации

Результаты поиска

Содержание 1374.610

Отзывы:

Похожие инструкции для 1374.610

Бренды по названию

Популярные бренды