Humanscale M/Connect 2, Руководство по сборке

Страница: 8 / 40

8
½ inch hole
C
Bolt-Through Mount
1
Drill 1/2” hole in desired location
NOTE
: To ensure M/Connect makes full contact with desk, locate hole
at least 2” away from back edge of desk.
2
Lower M/Connect onto desk aligning bolt with hole. ③
3
Slide the Bolt-Through Plate (C) over the bolt and tighten the nut
④
4
Place the protective cap (D) overthe bottom of the bolt. ④
④
Sliding Desk Mount
1
Slide unit with loosely mounted bracket against work surface edge.
①
2
Tighten both set screws(B) evenly into bracket to a snug fit.
②
B
③
D
① ②