12
K
K
Attaching a Monitor Arm to M/Connect
CAUTION
: Maximum weightload of M/Connect is as follows:
M2.1: 15.5 lbs. - M8.1: 28 lbs. - M10: 40 lbs. - M/Flex: 60 lbs. total
M10 is not to be used on M/Flex when mounted to M/Connect
DO NOT exceed maximum weight limits.
When used in conjunction with M/Connect, M/Flex Post must be limited to 24 inches.
M2.1/M8.1/M10 Monitor Arm
1
Refer to monitor arm instructions to setup Smart Stop Ring.
2
Insert Monitor Arm into the base stem until it clicks into place.
①
3
Refer to monitor arm instructions to continue installation.
M/Flex Post
1
Loosen the two set screws (K) in M/Flex stem.
②
2
Insert the M/Flex post into the base stem and twist clockwise onto
internal bolt until fully seated.
③
3
Tighten both set screws evenly to secure post.
④
4
Refer to monitor arm instructions to continue installation.
④
①
②
③
Содержание M/Connect 2
Страница 2: ......