manualshive.com logo in svg

Hughes Network Systems HN9000, Руководство по установке, Страница: 107 / 154

Поделиться
Скачать
Hughes Network Systems HN9000 Скачать руководство пользователя страница 107

Corrective action

Explanation

State name

State code

Verify cabling and pointing. If
antenna has moved or been
disturbed, repoint it.

Rx cable connectivity tests have
failed.

Rx Connectivity Down

26

Verify cabling and pointing. If
antenna has moved or been
disturbed, repoint it.

Modem is unable to track beacon.

No Beacon

27

Verify cabling and pointing. If
antenna has moved or been
disturbed, repoint it.

Modem is not receiving
transmission information packets
from satellite.

No TIPs

28

Verify cabling and pointing. If
antenna has moved or been
disturbed, repoint it.

Tx cable connectivity tests have
failed.

Tx Connectivity Down

29

Rain or snow can cause this
condition. If it continues during

Bad slots are transmissions from
the modem that are not received

Too Many Bad Slots

30

clear weather, verify cabling and

by the satellite. State code 30

pointing. If antenna has moved or
been disturbed, repoint it.

indicates a percentage of bad slots
within the last hour that exceeds a
preset value.

Transient – No action is necessary.

Transmitter has been shut down
due to ECL. ECL measures total

ECL Active

31

transmitted power over 30-minute
periods and turns off the transmitter
if the total power exceeds a preset
limit imposed by the FCC.

Restricted states (NOCC-imposed restrictions)

Call Installer Support with site
name to resolve the issue.

Modem has been barred from
transmitting by the NOCC. Possible
reasons for barring include

Barred

32

interference isolation, uplink failure,
or government order.

Call Installer Support with site
name to resolve the issue.

Modem has been put in a
suspended state by the NOCC.
This occurs if a customer’s bill is
overdue or if service is terminated.

Suspended

33

Call Installer Support with site
name to resolve the issue.

Modem has been put in
maintenance state by the NOCC.

Maintenance

34

Call Installer Support with site
name to resolve the issue.

Modem has been put in
out-of-service state by the NOCC.

Out of Service

35

Viewing the state codes list

To view a list of state codes with an explanation of each code:

1.

Click the underlined state code number.

91

HN9000 Satellite Modem Installation Guide

1037576-0001 Revision E

Chapter 9

System Control Center

Содержание HN9000



























































































































































Отзывы:

Нет отзывов