Huffy KD58C-LCD, Руководство пользователя

Страница: 17 / 36

17
Pedal Installation
CAUTION:
There is a RIGHT pedal marked R and
a LEFT pedal marked L .
NOTE:
A Pedal Wrench is preferred for attaching Pedals.
A thin open-end
wrench can also be used.
• The pedal marked R has right-hand threads. Tighten
it in a
clockwise direction
.
• The pedal marked L has left-hand threads. Tighten
it in a
counterclockwise direction (anti-clockwise)
.
• Turn the right pedal marked R into the right side of
the crank arm, and the left pedal marked L into the
left side of the crank arm.
Tighten the pedals:
• Make sure the threads of each pedal are fully into the
crank arm.
WARNING:
Ensure pedals are secure in
crank arms so they will not loosen. Periodically check
tightness.
L
R
L R
Three-Piece Cranks (various models)
Maintenance: Both Crank Arms A were tightened to the spindle B at the factory. After
riding the bicycle the fi rst few times, make sure the crank arms have not loosened. If either
crank arm has loosened during this “break-in” period, re-tighten or have it tightened by a
bicycle service shop.
Frequently check the tightness of the crank arms.
If loose, tighten or have them tightened by a
bicycle service shop.
WARNING:
If you ride the bicycle
with a loose crank arm, the crank arm may fall off .
The spindle may also damage the crank arm.
A
B
A
ssembly