Huffy KD58C-LCD, Руководство пользователя

Страница: 15 / 36

15
A
ssembly
WARNING:
To prevent the seat coming loose and possible loss of control, the
“ MIN-IN ” (minimum insertion) mark A on the seat post must be BELOW the top of the
seat tube B .
STEP 1
- INSERT SEAT POST INTO SEAT TUBE:
• If needed, loosen seat post clamp screw D or open
the quick release lever E .
• Point the seat forward and put the seat post C into
the seat tube B with the “ MIN-IN ” marks BELOW
the top of the seat tube as shown.
STEP 2
- BOLT SEAT CLAMP:
(various models)
• With seat post
C
inserted according to
STEP 1
-
Tighten screw
D
securely so seat supports the rider
without moving.
STEP 3
- QUICK RELEASE LEVER: (various models)
CAUTION
:
Operate the quick release lever by
HAND
ONLY - DO NOT USE TOOLS.
1. As needed, open and close the quick release lever E
with one hand and tighten or loosen the adjusting
nut G by hand, so that you fi rst feel resistance to the
quick release lever when it is in the “ OPEN ” position
1
.
2. Push the quick release lever to the “ CLOSE ” position
2
- It will take strong force to clamp securely so
that the quick release Lever lays against the seat
post clamp F .
WARNING:
You must use strong force to
move the quick release lever securely to the “
CLOSE
”
position 2 . This ensures that the seat does not move
during normal operation.
NOTE: I
Suggested Torque 20-22NM - Verify seat does not move
while riding.
REFLECTOR:
(as equipped)
Position seat post refl ector (if equipped) H so it points straight
backwards. Tighten clamp screw.
Seat Installation
A
A
G
1
2
3
1
2
C
B
C
F
C
E
H
D
I