8
9. ATTACHING THE FAN
BLADES
Step 1. Insert the blade through the blade slot
in the decorative housing. Align the holes in
blade and blade bracket, place the blade
support plate on blade as showing in Figure
17 making sure the holes are also aligned
and secure with the screws and fiber washers
provided.
Step 2. Repeat process with other blades.
Figure 17
Figure 18
10. INSTALLING THE
MOUNTING PLATE
1. Remove 1 of 3 screws from the mounting
ring and loosen the other 2 screws. (Do not
remove)
2. Place the key holes on the mounting plate
over the 2 screws previously loosened from
the mounting ring, turn mounting plate until
it locks in place at the narrow section of the
key holes. Secure by tightening the 2 screws
previously loosened and install the one
previously removed. (Fig. 18)
Screws
Slot
Blade support plate
Fiber washers
Blade
Mounting
plate
Mounting ring
Screw x1
Screws x2
