9
Figure 20
Figure 19
12. INSTALLING THE
LIGHT BULBS &
GLASS SHADE
1. Install 3 x 40W candelabra bulbs (not
included). (Fig. 20)
2. Install the glass shade to the mounting
plate with 3 screws provided. (Fig. 20)
3. Restore power and your light kit is ready
for operation.
11. INSTALLING THE
LIGHT PLATE
NOTE:
Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box. Turning power off using the fan switch
is not sufficient to prevent electric shock.
Step 1. Remove 1 of 3 screws from the
mounting plate and loosen the other 2 screws.
(Do not remove)
Step 2. Raise and hold the light plate close
to the mounting plate and proceed to do the
wire connections. Connect the white wire
connectors from the light plate and fan,
follow the same procedure with the black
wire connectors. (Fig. 19)
Step 3. Tuck connections neatly into
mounting plate, Place the key holes on the
light plate over the 2 screws previously
loosened from the mounting plate, turn light
plate until it locks in place at the narrow
section of the key holes. Secure by tightening
the 2 screws previously loosened and install
the one previously removed. (Fig. 19)
Mounting plate
Connection plugs
Light plate
Screws x 3
Bulbs
Glass shade
Mounting plate
Thumb
screws x 3
