33
To ensure you follow the proper firmware upgrade method, follow the
PTZOptics SDI/NDI Firmware Up-
Config Tab
The Config tab allows you to change the network parameters of a camera. To properly access this inter
-
face, right-click a camera from the Search tab, and select “Config” from the menu.
To assign a static IP address, you’ll need to know of a free IP address in your network range, your subnet
mask, Gateway, & First DNS. To find this information, check out the section Discovering your Network Info
below.
Alternatively, you can click the “Mode” dropdown and select “DHCP” to have your network auto fill this
information. In either case, once the network information is filled, click the “Set” button to apply these pa
-
rameters. The camera willrestart with the new network settings.
Backup Tab
The Backup tab allows you to backup and restore files. For best results, name each backup file some
-
thing specific to the camera (such as the serial number).
Ŝ
These files consist of:
Ŝ
Serial Number
Ŝ
MAC Address1
Ŝ
Presets2
Ŝ
Other core camera files.
¹
Because the MAC Address is stored in this backup file, ensure you do not apply/restore it to a different camera, as that will change the
second camera’s MAC address to the first camera’s MAC address.
²Presets are not always saved properly and may need to be re-set.
Preview Tab
The Preview tab allows you to view the RTSP feed of your camera. You can send the camera to the
Preview tab from the Search tab, or simply type in the IP address into the field and click “Connect”.
Modify Netinfo
Click the “Start Search” button from the Online Device section. This will This will search for all Hud-
dleView, SimplTrack2, and SimplTrack Lite cameras on your network range. If you do not see your
camera, you will need to change your computer’s IP address to match the network range of the cam-
era.
