32
To ensure you follow the proper firmware upgrade method, follow the
PTZOptics SDI/NDI Firmware Up-
Config Tab
The Config tab allows you to change the network parameters of a camera. To properly access this inter
-
face, right-click a camera from the Search tab, and select “Config” from the menu.
To assign a static IP address, you’ll need to know of a free IP address in your network range, your subnet
mask, Gateway, & First DNS. To find this information, check out the section Discovering your Network Info
below.
Alternatively, you can click the “Mode” dropdown and select “DHCP” to have your network auto fill this
information. In either case, once the network information is filled, click the “Set” button to apply these pa
-
rameters. The camera willrestart with the new network settings.
Backup Tab
The Backup tab allows you to backup and restore files. For best results, name each backup file some
-
thing specific to the camera (such as the serial number).
Ŝ
These files consist of:
Ŝ
Serial Number
Ŝ
MAC Address1
Ŝ
Presets2
Ŝ
Other core camera files.
