29
Protocol:
Camera control protocol.
Options include: VISCA, Pelco-D, Pelco-P
Baudrate:
Camera control baudrate.
Options include: 2400, 4800, 9600, 38400
IR Address:
Change camera IR address
Options include: 1 ~ 4
Video Format:
Change camera resolution & framerate Options include: 720p60, 720p50, 1080p60,
1080p50, 1080p30, 1080p25, 1080i60, 1080
Mount Mode
: Change mounting mode
Options include: Stand, Ceiling
Language
: Change camera language
Options include: English, Chinese Status
Status
Move the cursor to the “Status” option and press the [Enter] button to enter the Status page, as
shown in the figure below.
Status
Connections to LAN via CAT5 or CAT6 cable
Protocol
VISCA
Baudrate
9600
IR
Address
1
Video Format 1080p30
Mount Mode Stand
Firmware Ver 1.0.35
Select [Enter] Next [ ] Exit
The Status tab shows the current settings of the camera.
You cannot change the values in this tab.
Note: Press the [Enter] button to confirm. All camera parameters will return to default, including IR
remote & VISCA Addresses.
