21
Serial Communication Control
In default working mode, the camera is able to connect to a VISCA controller with an RS-232.
RS-232 Communication Control
Baud rate: 2400/4800/9600/38400;
Starting Position: 1 bit
Data bit: 8 bits
Stop bit: 1 bit
Check digit: None
After power on, the camera goes to the upper right limit and then back to the middle position. The
zoom lens is pulled to the farthest position, auto focus, and the aperture is adjusted to the default
value. If the camera has preset 0 saved, the camera will be set to position 0 after the initialization is
completed. At this point, the user can use the serial port command to control the camera.20
