14
UN / PW
– The UN / PW tab allows you to
adjust the camera’s name & password, as well as
adjust the NTP settings
• Old Password
– Type the old password into
this field in order to change the camera pass
-
word.
Ŝ
Default value: “admin”
• New Password
– Type the new password into
this field in order to change the camera pass
-
word.
Note: Passwords must contain only letters
and numbers. Special characters are not
applicable.
Max length: 15 characters.
•
Confirm
– Type the new password into this
field again in order to change the camera pass
-
word.
• Camera Name
– Adjust the camera’s friendly
name.
Ŝ
Default value: SimplTrack Lite
NDI
– The NDI tab allows you to adjust the NDI
protocol settings.
• NDI Receive Group
– The NDI® Receive
Group allows you to limit which users on your
LAN can see the NDI® source
Ŝ
Default value: Public
For best results, the Receive Group should
remain “Public”. Once the Receive Group is
changed, you will need to join the Receive
Group through NDI® Access Manager.
• NDI Local Device Name
– The friendly name
the camera will show up as within NDI® devic-
es.
Ŝ
Default value: SimplTrack Lite
For best results, give all ‘like’ cameras the
same Local Device Name. e.g., “Tracking
cams” or “Framing Cams”
• Enable NDI® Discovery Server Checkbox –
Enable / Disable connectivity to a NDI® Dis-
covery Server
Ŝ
Default value: Off (unchecked)
•
NDI® Discovery Server Textbox – This field al
-
lows you to define the IP address of the NDI®
Discovery Server. o Default value: (blank)
For information on the NDI Discovery Server,
