Huchez PALANBOX 160, Инструкция по эксплуатации

Страница: 11 / 25

©
2008 by Huchez Treuils S.A.S.
Original manual
11
FR
Reproduction prohibited
9 - Upkeep - Maintenance
Regularly check that the device is level and that it is securely fastened.
Also check the condition of the lifting device according to the specifications of its technical manual and
in particular the chain, or the cable, the hook and the brake.
The winch has been designed to need minimal maintenance.
9.1. Greasing
The winches are greased at the factory, so they don't need to be greased again before first use. They
should be lubricated regularly, depending on use. For normal use, it is recommended that they are
lubricated once a year:
Quality of grease Quantity
NLGI N0.0 80 160 230
Caltex Multifak Ep.
Cosmogear SP460
100
cc
250
cc
250
cc
9.2. Brake: Factory set.
9.3. Replacement of the carbon brushes
Important: regularly clean the accumulated powder to ensure the insulation resistance is up to 1MΩ.
It is essential to check the condition of the brushes regularly. If
the length is less than 7.5 mm (due to wear and tear), it is
absolutely necessary to replace the brush immediately.
For replacement, gently insert the carbon brush into the brush
holder first, then insert the brush head into the hole.
Drain bolt
Carbon
brush
holder
screw
Oil filling hole
Carbon
brush
holder