Hubner TDP 0,7 Series, Руководство по сборке

Страница: 22 / 31

D.C. tachometer generator TDP 0,7
22
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
commutator contact face) as
a result of the air being too
dry. avoid dust in ambient air).
Brush pressure too high Contact the manufacturer.
Grease on brush contact face Clean contact face (contact
the manufacturer)
Heavy vibration * See above.
Surface temperature too high
(>100 °C)
Operated under short-circuit
conditions Check device; please
contact the manufacturer.
Other faults Please contact the
manufacturer.
6.2
Inspection and maintenance schedule
PLEASE NOTE!
No other actions are required to be carried out
on the device in addition to the following
cyclical inspections described in this inspection
schedule. Any attempt to tamper with the
device will result in the warranty being declared
null and void!
Caution! Replace the sealing ring on special versions (tacho-generators with speed increasing gear)
after 5000 to 8000 hours of operation. Blow out metal filter of tacho-generators designed with
ventilation vents (IP 55 spec.).
Contact the manufacturer when operating any other special version and combinations of devices (e.g.
TDP 0.7 + FSE 102).
Interval Inspections To be carried out by
Regularly Check fastening screws are seated
correctly Skilled personnel
After approx. 2000 operating
hours Check carbon brushes; blow carbon
brush dust out of the machine using dry,
oil-free compressed air; check ease of
movement. When changing carbon
brushes (service life approx. 10 000 –
20 000 operating hours depending on
environmental conditions and speed)
ensure the new brushes are of the same
quality and type. Please note: Double
tacho-generators have 2 commutators
and 2 brush rockers). Skilled personnel
After approx. 2000 operating Clean soiled commutators using a clean, Skilled personnel