Hubner TDP 0,7 Series, Руководство по сборке

Страница: 19 / 31

D.C. tachometer generator TDP 0,7
19
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
5.8
Dismantling
Observe and adhere to safety information (2)!

Shut down and ensure the machine cannot be restarted.

Turn off and isolate the power supply; turn off and isolate the power supply to any
additional or auxiliary circuits.

Ensure adjacent live components are insulated and safeguarded.

Examine components for damage and broken edges (for example risk of cuts from
broken off foot).

Exercise due care and attention when removing coupling parts and fastenings; support
the opposite end of the shaft (
blows will damage the bearings ). Coat the shaft with a thin
layer of oil and seal with screw cap. Ensure the terminal box and cable glands are
sealed dust and water-tight; ensure the degree of protection (see nameplate) is achieved
and guaranteed for transport.

Observe and adhere to transport information (5)!

Ensure that the packaging (carton + palette) used to transport the machine is correctly
sized and that the machine is secured by the packaging in such a manner that forces
resulting from the weight of the machine during transport cannot cause any damage to
the machine, to neighbouring parts or injury to personnel! Use transport locks to reduce
the load acting on the bearings.
Dismantling (disassembly / removing the armature) the fully assembled tacho-generator
TDP 0.7 must always be undertaken by the manufacturer only.