Hubner TDP 0,7 Series, Руководство по сборке, Страница: 16 / 31

D.C. tachometer generator TDP 0,7
16
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
5.5
Uses
DC-Tacho-Generators from the series TDP 0.7 are used to convert rotary motion (rpm) to DC
voltage in proportion to the rotating speed. These encoders are suitable for deployment with
larger industrial drives such as those used in steel and rolling mills, in coal mining operations, in
process technology, in railway systems, in power plants, in marine engineering and so on.
5.6
Place of installation

Installation height < 1000 m above msl. Consult the manufacturer if the installation height is >
1000 m (possible derating)

Permissible ambient temperature - 40 °C to + 100 °C.

Avoid too dry ambient conditions (ensure patina build-up on carbon brush/commutator).

Observe details on nameplate (ratings, protection class and so forth) when operating the DC
tacho-generator.

Do not attach or lean temperature sensitive components onto or against the machine; do not
position such components in the immediate vicinity of the machine.

Ensure sufficient space is available for maintenance work (please refer to 8.2 Inspection and
maintenance schedule)

We recommend installing a canopy for model designs and shaft ends facing downwards; fit a
cover on the plant side if the shaft end faces upwards.

The owner must ensure that no system resonance or vibration arise from interaction between
the machine and plant that could impair the functioning of the machine or result in damage to
the machine or the entire plant or accelerate the ageing process (of the bearings, for
example).

It is the owner's responsibility to undertake suitable measures at the place of installation that
ensure the devices and plant in their totality fulfil the relevant standards applicable to
electromagnetic compatibility.