Hubner Cobolt 06-01 Series, Руководство пользователя, Страница: 47 / 60

47 | 60
OWNERS MANUAL | Cobolt 08-01 Series | D0141-K SEPTEMBER 2020
sames Set analog modulation enable state *
0
= disable
1 = enable
gdmes? Get digital modulation enable state *
0
= disabled
1 = enabled
sdmes Set digital modulation enable state *
0
= disable
1 = enable
gom? Returns the operating mode
0
– Off
1 – Waiting for key
2 – Continuous
3 – On/Off Modulation
4 – Modulation
5 – Fault
6 – Aborted
ilk? Get interlock state
0
= OK
1 = interlock open
f? Get operating fault
0
- no errors
1 – temperature error
3 - interlock error
4 – constant power time
out
cf Clear fault
gsn? Get serial number 32-bit unassigned integer
hrs? Get laser head operating hours Float
* Analog and digital modulation states are independent. To switch from analog to digital modulation it is necessary
to disable analog and enable digital.
06-MLD Specific Commands
Command Function Argument Returned value
glmp? Get laser modulation power set point Float (mW)
slmp Set laser modulation power Float (mW)
salis Set analog low impedance (50 Ω) state 0 = disable
1 = enable
galis? Get analog low impedance (50 Ω) state
0
= disabled
1 = enabled