Huber MPC RotaCool, Руководство по эксплуатации

Страница: 32 / 52

Function description
OPERATION MANUAL Chapter 3
RotaCool®
V2.3.0en/04.08.21//1.30
32
▪
The application should be roughly at the same height of or below the temperature control unit if
the temperature control is close to the boiling temperature of the thermal fluid.
▪ Fill the temperature control unit slowly, carefully and evenly. Wear the necessary personal pro-
tective equipment, such as goggles, heat-proof and chemically resistant gloves, etc.
▪
The temperature control circuit must be vented after filling and setting all required parameters.
This is required to ensure trouble-free operation of the temperature control unit and hence your
application.
For water-cooled temperature control units, please take the cooling water temperature necessary
for perfect operation and the required differential pressure from the data sheet. → From page 50,
section »Annex« .
3.4 Display and control instruments
3.4.1 Display
The value of the internal temperature is displayed. For example, this is the bath temperature for
temperature control units with a bath, or the flow temperature of chillers. Different key combina-
tions also display the setpoint, a menu item or settings.
3.4.2 LED display status
These LEDs indicate the current operating condition.
3.4.3 Arrow keys
These keys are used to ( increase or decrease ) the setpoint or select or change a menu item. The
>Arrow keys< [C] are also required to call the menu up.
3.4.4 SET key
The >SET key< [D] is used to switch to the setpoint temperature. It is used to display and modify the
setpoint temperature. The >SET key< [D] is also used to display the values of the various menu
items.
3.4.5 Start/Stop key
This key starts or stops the thermoregulation.
The control panel:
Displays and keys