Commissioning
Chapter 2
OPERATION MANUAL
V2.3.0en/04.08.21//1.30
RotaCool®
27
2.7.2
Opening/closing valves
Opening valves:
Open valves by turning them counterclockwise (turn 90° left as far as it
will go).
Close valves:
close valves by turning them clockwise (turn 90° right as far as it will go).
PROCEDURE
Check that all valves are closed.
Close all valves by turning them clockwise (turn 90° right as far as it will go).
2.7.3
Installing collecting container
PROCEDURE
Install a suitable hose at the
>overflow<
[12] on the temperature control unit (if present). The
hose must be compatible with the thermal fluid and the temperature.
Put the other end of the hose in a suitable collecting container.
2.7.4
Install additional work surface (optional)
PROCEDURE
First mount the two mounting brackets in the appropriate holes.
Mount the additional work surface to the mounting brackets.
2.7.5
Connecting the functional earth
PROCEDURE
If required, connect the temperature control unit’s
>Functional ground terminal<
[87] to the
building’s grounding point. Use a ground strap for this purpose. For the exact position and thread
size please refer to the wiring diagram.
→
From page 50, section
Opening and closing
valves
Install additional work
surface
Содержание MPC RotaCool
