P
AGE
14 of 16
S.M.A.R.T. E
MERGENCY
P
HONES
42004-661L2C
f:\standard ioms - current release\42004 instr. manuals\42004-661l2c.doc
11/02
Maintenance
TMS users can schedule auto-dial maintenance calls to alert maintenance personnel of any unusual sensor
or fault conditions that exist. S.M.A.R.T. Phones can also be programmed to generate an auto-dial
maintenance call any time a sensor event or fault event is discovered. Access to the S.M.A.R.T. Phone’s
maintenance mode is restricted through the use of the maintenance access PIN. The maintenance access
PIN should be distributed only to trained maintenance personnel.
If your S.M.A.R.T. Phone requires service, contact your Regional Service Center for a return
authorization number (RA#). Equipment should be shipped prepaid to GAI-Tronics with a return
authorization number and a purchase order number. If the equipment is under warranty, repairs will be
made without charge. Please include a written explanation of all defects to assist our technicians in their
troubleshooting efforts.
Call 800-492-1212 inside the USA or 610-777-1374 outside the USA for help identifying the Regional
Service Center closest to you.
Reference Material
Table R-1. Basic Programming Commands
Command:
Return:
Description:
*1nn <charac>#
c
Write Memory nn (00–31) with characters (up to 24)
*50 <6~999>#
c
Write Call Time-out (6–998 x 10s, 999 disables)
*70 <0~15>#
c
Write Ring Mode (0-15)
‘c’ in the above return fields is the system-generated check-digit.
Table R-2. Default Configuration
Parameter
Default Setting
Auto-answer
Enabled
Rings Before Auto-answer
0
Rings After Auto-answer
10
Connection Waiting Period
0
Dial Tone Detection
Disabled
Dial Tone Waiting Period
0
Dial Tone Verification Period
1 second
Mute Before Dial
Enabled
Pre-connection Time-out
0 (= 27 seconds)
Send Volume
+33 dB
Receive Volume
+1 dB
Call Time Out
60 min
Dial Mode
DTMF
