Pub. 42004-501C
Division 2 VoIP Telephones
—Wired and WiFi
Page 11 of 22
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-501C.docx
03/20
Table 3. Recommended Cable
Cable Use
Size
LAN
Cat5 or better UTP cable with an RJ-45 connector
Power
two-conductor, No. 18 AWG is typical
Inputs
two-conductor, No. 22 AWG is typical
Output contacts
two-conductor, No. 18 AWG is typical
Figure 7. Internal PCBA Connections
Network Cable
Connect a Cat5 or better UTP cable with an RJ45 connector between the LAN and the VoIP PCBA (see
Figure 7). The RJ45 jack is located on the underside of the VoIP PCBA.
Power
Power-Over-Ethernet (POE)
Connect power to the system as indicated in the POE equipment manual. (Power Mode A, Class 0)
