Hubbel GAI-Tronics 298, Руководство пользователя

Страница: 17 / 27

Page
17 of 26
Model 298 ADA-Compliant Emergency Telephone Pub. 42004-304A
f:\standard ioms - current release\42004 instr. manuals\42004-304a.doc
06/02
Location Identification Code Dialing
The Location Identification Code feature enables security personnel to quickly and easily locate an
individual in trouble. When the individual presses the
E
MERGENCY
push button, the person receiving the
call (typically the security operator) presses the
*
DTMF button. The telephone detects the *DTMF signal
and transmits a three-digit location identification code to identify which emergency telephone is originating
the call.
DTMF Call Disconnect
The DTMF Call Disconnect feature enables the person receiving the call (typically the security operator) to
disconnect the call on command. The security operator can disconnect the call by pressing
#
continuously
for two seconds or by pressing
#
twice within two seconds.
Feature Key
Sequence Description Default
ADA Options # 1 8 L This option enables three features: call received
indicator lamp activation, location identification
code dialing, and the DTMF call disconnect
feature.
To enable the ADA options, set L =1. To disable
the ADA options, set L =0.
0 (Disabled)
Location
Identification
ID Setup # 1 3 L N N N This option enables and stores the three-digit
location identification ID number. To enable the
ID feature, set
L =1. To disable the ID feature,
L =0. Enter the three-digit location identification
code in the sequence N N N .
For Example : To enable the location ID feature
and store the three-digit ID code 357 , enter
# 1 3 1 3 5 7 . To disable the location ID
feature, enter
# 1 3 0 0 0 0
.
Note : The ADA options must also be enabled.
No default setting.
The user must
complete this step
to have the
identification code
transmitted.
Hardware Settings Table
Default Settings User Settings
Function Setting Jumper/Position Setting Jumper/Position
Auto-answer Enabled J2/1 & 2
Password Protection Enabled J9/1 & 2
Line Polarity Non-polarized J6/1 & 2
Ancillary Control Disabled J10/2 & 3