MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
42397
ASSEMBLY & INSTALLATION INSTRUCTIONS
Centre Outdoor Sconces 302610 & 302612
B401
FROSTED
SURFACE
M
L
K
J
B
(Figure 4)
To Prepare Glass
(Figure 4 )
1.
Unpack glass (J).
2.
Place glass on a clean surface. Press anchors (K) into holes
in glass from each side until anchor is flush with side of
glass.
3.
Locate front tube assembly (B). Place glass into front tube
with frosted surface oriented as shown in Figure 4.
Note:
It may be necessary to loosen set screw (M) to allow
glass to pass into tube.
4.
Align anchors (K) in glass with holes in front tube (B).
Thread flat head screws (L) into anchors evenly to secure
glass to tube.
5.
Using hex wrench provided, tighten set screw (M) against
glass.
6.
Repeat steps for second piece of glass.
7.
Follow steps on next page to complete installation.
5 OF 6
