MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
42397
ASSEMBLY & INSTALLATION INSTRUCTIONS
Centre Outdoor Sconces 302610 & 302612
B401
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you pur
-
chased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of
this fixture.
To Complete Installation
(Figure 5)
1.
Install bulbs (O) (
included
) into sockets (N).
2.
Orient front tube (B) assembly so thumb screws and
washer still installed are toward the top.
3.
Front tube (B) assembly can only be installed one
way. A hole in front tube will need to line up with the
alignment stud on the fixture (A).
4.
Tilt front tube (B), slip over bulbs (O) and insert
thumb screws (C) and rubber washers (D) into slots
on top of fixture (A).
Note:
Be sure rubber washers are on the backside
of the fixture as seen in Figure 5 - back view.
5.
Align bottom holes in fixture (A) with tube (B) and
install remaining thumb screws (C) and rubber
washers (D) to secure front tube assembly.
Note:
Make sure all thumb screws are as tight as
possible.
6.
Restore electricity at main breaker.
ALIGNMENT
STUD
SLOT
N
C
B
O
A
D
(Figure 5)
B
A
BACK VIEW
C
D
6 OF 6
HOLE FOR
ALIGNMENT
STUD
Caution: Be careful not to hit bulbs with front tube.