HUAYUAN POWERCUT105, Инструкция по эксплуатации

Страница: 9 / 43

- 5 -
for cutting.

The cutter casing should ground reliably. Please make sure the grounding bolts
of power ground reliably in case of electric shock.

Cutter is the equipment with high voltage. Please wear insulated protective
shield when cutting.

When exchanging torch and wearing parts, please turn off the supply power
first.

Protective shield should be worn.
In order to avoid any hurt to eyes from ultraviolet radiation and strong
light and to skin from spatter, please wear protective shield according to
related rules and regulations of labor protection.

It is forbidden to inhale harmful gases.
The fumes and gases produced during cutting is hazardous to health.
Please wear protective shields and install aerator according to related rules
and regulations of labor protection.

Cutting cannot proceed in closed container.

The work-piece just after being cut is at high temperature. Please prevent from
scald.

Protective gas cylinder and air compressor must be placed in a fixed position
and prevented from collision.

Cutter and cutting place should be far away from flammable materials.

Prevent foreign bodies from entering inside the machine. And protect the cable
from sharp materials.

Protect the machine from fall or collision.
In case of fall or collision, it can be used only after professional checking.

In the surface or inside of the cutting work-piece, there should be no flammable
and explosive materials or chemical materials harmful to human.

Installation and repair person must have state-authorized electrician operation
certificate.

Cutting operation person should read this manual carefully and know the
operation method well.