HUAYUAN POWERCUT105, Инструкция по эксплуатации

Страница: 36 / 43

- 32 -
Trouble shooting without error code
E88
Torch fix cap not install
well
1
、
Turn on the machine after confirm the fix cap i
nstall well
E89 Torch consumables choke
1
、
Turn off the machine and install the consumables
2
、
Replace consumables
Phenomenon Reason Measurement
Turn on the plasma
power source,the all
indicator of power
source not light,
panel no display.
1
、
Default phase
2
、
Power supply switch damaged.
3
、
Plasma power source control
transformer power supply not
working.
1
、
Check three phase power
supply.
2
、
replace power source switch
3
、
replace 8A fuse of rear
power source
Not fully
piercing,there are
sparks on the
workpiece surface. 1
、
cutting current setting too low
2
、
cutting speed too fast
3
、
torch part damaged
4
、
metal too thickness
1
、
Check and set current
according to cutting table .
2
、
Check and set cutting speed
according to cutting table .
3
、
Replace the consumables
accordingly
4. Select the cutting procedure
according to the cutting table
parameter